Common Installation Errors with Aluminum Composite Panel and How to Avoid Them

You Can Get The Premium Aluminum Composited Panes 

In Pufeier, after 30 years of experience as a professional manufacturer. We pride ourselves on being able to create new and better products that help our customers from around the world, in this article we will tell you some of the problems in installing aluminum composite panels as well as how to avoid them. 

How to Prepare the Surface Correctly Prior To Application 

Prior to mounting aluminum composites, it is essential that the substrate be thoroughly cleaned, dry and flat. Any dirt, dust or debris on the surface can impact panel adhesion and cause problems later. To adequately prepare your surface, begin by washing it well using a mild detergent and water. Once clean, let the surface dry thoroughly before you begin installation. Also look for any rough spots or chips that will also need to be fixed before the panels go up. 

Eliminating Panel Fit and Spacing Problems 

Improper panel alignment and spacing are typical instal¬lation mistakes with aluminum composite panel. To prevent this, measure and mark each panel placement carefully. Use a level to make sure the panels are even horizontally and vertically. Also keep in mind the gap between panels to have a fair proportion on installation. With the right alignment and spacing of panels you would never know this is actually a panel product. 

The Use of An Adequate Tool During Installation Is Essential 

Select the Best Panel Installation Tools for panel aluminium composite Proper tools can make all the difference in an aluminum panel installation. And at the time of installation, be sure to have tools such as a saw, drill and level on hand to make installation simple. In addition, it is also important to fasten and attach using the proper rivets and adhesives as per the panel manufacturer to make sure your install stays put and lasts. With the proper tools and materials, you can eliminate any problems while achieving a professional look. 

What to Do If the Panels Are Damaged Upon Receipt of Your Order 

If panels are damaged while being installed it’s important to address the problem early before further damage occurs. If a section is dented or scratched, touch it up with paint or putty. For such damages as a bent panel, the panel may have to be changed in its entirety, so that the installation is not compromised. It is always good to have a few additional panels on hand in case something goes wrong with your install. 

Where to Find Pro Help for Complicated Installation Jobs 

For such installation projects, you may need a professional installer who is familiar with the job requirements for you to receive the best quality service. Installation instructions are provided to all existing clients who require help in installing their ACP aluminium panel projects. At Momentum, we have the team of experts who can get the job done right – no matter how difficult a project may be. Feel free to ask for professional assistance when necessary in order to ensure a safe and comfortable installation process.